Filters are usually classified according to their frequency-domain characteristic as lowpass, high pass, bandpass and band stop filters.

1.Lowpass Filter

A lowpass filter is made up of a passband and a stopband, where the lower frequencies Of the input signal are passed through while the higher frequencies are attenuated.

2.Highpass Filter

A highpass filter is made up of a stopband and a passband where the lower frequencies of the input signal are attenuated while the higher frequencies are passed.

3.Bandpass Filter

A bandpass filter is made up of two stopbands and one passband so that the lower and higher frequencies of the input signal are attenuated while the intervening frequencies are passed.

4. Bandstop Filter

A bandstop filter is made up of two passbands and one stopband so that the lower and higher frequencies of the input signal are passed while the intervening frequencies are attenuated. An idealized bandstop filter frequency response has the following shape.

5.Multipass Filter

A multipass filter begins with a stopband followed by more than one passband. By default, a multipass filter in Digital Filter Designer consists of three passbands and four stopbands. The frequencies of the input signal at the stopbands are attenuated while those at the passbands are passed.

6.Multistop Filter

A multistop filter begins with a passband followed by more than one stopband. By default, a multistop filter in Digital Filter Designer consists of three passbands and two stopbands.

7.All Pass Filter

An all pass filter is defined as a system that has a constant magnitude response for all frequencies.

IDEAL FILTER CHARACTERISTIC

1. Ideal filters have a constant gain (usually taken as unity gain) passband characteristic and zero gain in their stop band.

2. Ideal filters have a linear phase characteristic within their passband.

3. Ideal filters also have constant magnitude characteristic.

4. Ideal filters are physically unrealizable.